Zero Android · Zero Linux · 100% #![no_std] Bare-Metal Rust · Iceland (.is) Signed OTA Gate (g8t.is & aye.is)
Select your hardware target and enter the Wi-Fi SSID & password your new AyeOS Bare-Metal v5.4.0 node should join on boot. Version checks run exclusively over our sovereign Iceland (.is) domains (g8t.is & aye.is).
Prepare your phone (BLU G75 or Android AArch64) in 60 seconds, then connect via USB-C so Chrome can switch it into Fastboot mode and unlock the bootloader:
On the phone, open Settings → About Phone and tap Build Number 7 times rapidly until it says "You are now a developer!"
Go to Settings → System → Developer Options and toggle ON both OEM unlocking and USB debugging.
Plug the phone into this computer via USB-C and click 1. WebUSB ADB → Reboot Bootloader below (or hold Vol Down + Power).
When prompted on the phone screen during flashing unlock, press Volume Up to authorize bootloader unlock.
Once your device is in FASTBOOT mode over USB, check the Sovereign Obliteration Agreement below to unlock the bootloader, purge init_boot_a/b, and flash ayeOS v5.4.0 directly from Chrome.
Connect via WebSerial (navigator.serial) to stream live AYEOS-V5.3-CALM-QWAVE-8B-OTA UART/CDC telemetry or push Wi-Fi credentials over serial — or run the standalone Python obliterator on Linux/macOS:
curl -fsSL https://aye.is/install.sh | sudo python3 - --ssid "224_5g_P3M8" --yes-obliterate